Vooner VaneGard® VG30 Liquid Ring Vacuum Pumps | Compare Items
| Items | |||||||||||||||||||
|
|
|
|
|
|||||||||||||||
| Description | |||||||||||||||||||
| Brands | |||||||||||||||||||
|
Vooner FloGard® Vooner VaneGard® |
Vooner FloGard® Vooner VaneGard® |
Vooner FloGard® Vooner VaneGard® |
Vooner FloGard® Vooner VaneGard® |
Vooner FloGard® Vooner VaneGard® |
|||||||||||||||
| Type | |||||||||||||||||||
| Single stage rotor, cone shape ports, liquid ring vacuum pump | Single stage rotor, cone shape ports, liquid ring vacuum pump | Single stage rotor, cone shape ports, liquid ring vacuum pump | Single stage rotor, cone shape ports, liquid ring vacuum pump | Single stage rotor, cone shape ports, liquid ring vacuum pump | |||||||||||||||
| Cone Opening Vacuum Level | |||||||||||||||||||
| Low (L) | Low (L) | Low (L) | Low (L) | Low (L) | |||||||||||||||
| Nominal Sealing Liquid Flow Rate at 15 Inch (in) Mercury Gauge (HgV) Vacuum | |||||||||||||||||||
|
75 to 115L/min 20 to 30g/min |
75 to 115L/min 20 to 30g/min |
75 to 115L/min 20 to 30g/min |
75 to 115L/min 20 to 30g/min |
75 to 115L/min 20 to 30g/min |
|||||||||||||||
| Nominal Sealing Liquid Flow Rate at 20 to 24 Inch (in) Mercury Gauge (HgV) Vacuum | |||||||||||||||||||
| Nominal Sealing Liquid Flow Rate at 24 to 26 Inch (in) Mercury Gauge (HgV) Vacuum | |||||||||||||||||||
| Sealing Liquid Connection Size | |||||||||||||||||||
| 1in | 1in | 1in | 1in | 1in | |||||||||||||||
| Sealing Liquid Connection Type | |||||||||||||||||||
| National Pipe Thread (NPT) | National Pipe Thread (NPT) | National Pipe Thread (NPT) | National Pipe Thread (NPT) | National Pipe Thread (NPT) | |||||||||||||||
| Shaft Sealing | |||||||||||||||||||
| Packing | Packing | Packing | Packing | Packing | |||||||||||||||
| Bearing Design | |||||||||||||||||||
| Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer | Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer | Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer | Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer | Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer | |||||||||||||||
| Shaft Diameter (Drive End) | |||||||||||||||||||
|
4in 101.6mm |
4in 101.6mm |
4in 101.6mm |
4in 101.6mm |
4in 101.6mm |
|||||||||||||||
| Pump Inlet Flange Connection Size | |||||||||||||||||||
|
8in 200mm |
8in 200mm |
8in 200mm |
8in 200mm |
8in 200mm |
|||||||||||||||
| Pump Outlet Flange Connection Size | |||||||||||||||||||
|
6in 150mm |
6in 150mm |
6in 150mm |
6in 150mm |
6in 150mm |
|||||||||||||||
| Manifold Inlet Flange Connection Size | |||||||||||||||||||
|
10in 250mm |
10in 250mm |
10in 250mm |
10in 250mm |
10in 250mm |
|||||||||||||||
| Manifold Outlet Flange Connection Size | |||||||||||||||||||
|
8in 200mm |
8in 200mm |
8in 200mm |
8in 200mm |
8in 200mm |
|||||||||||||||
| Approximate Pump Weight | |||||||||||||||||||
|
5,755lb 2,610kg |
5,755lb 2,610kg |
5,755lb 2,610kg |
5,755lb 2,610kg |
5,755lb 2,610kg |
|||||||||||||||
| Rotor Material | |||||||||||||||||||
| Ductile Iron | 304 Cast Stainless Steel (SS) | 304 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 304 Cast Stainless Steel (SS) | |||||||||||||||
| Cone Material | |||||||||||||||||||
| Cast Iron | 304 Cast Stainless Steel (SS) | 304 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 304 Cast Stainless Steel (SS) | |||||||||||||||
| Head Material | |||||||||||||||||||
| Cast Iron | Cast Iron | 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | |||||||||||||||
| Note for Head Material | |||||||||||||||||||
| Replaceable 316 SS Wear Plates on cast iron heads. | Replaceable 316 SS Wear Plates on cast iron heads. | Replaceable 316 SS Wear Plates on cast iron heads. | |||||||||||||||||
| Bearing Carrier Material | |||||||||||||||||||
| Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | |||||||||||||||
| Housing Material | |||||||||||||||||||
| Cast Iron | Cast Iron | 304L Cast Stainless Steel (SS) | 316L Cast Stainless Steel (SS) | 304 Cast Stainless Steel (SS) | |||||||||||||||
| Note for Housing Material | |||||||||||||||||||
| Stainless Steel liner in cast iron housing | Stainless Steel liner in cast iron housing | ||||||||||||||||||
| Shaft Material | |||||||||||||||||||
| Carbon Steel | 410 Heat Treated (HT) Cast Stainless Steel (SS) | 410 Heat Treated (HT) Cast Stainless Steel (SS) | 410 Heat Treated (HT) Cast Stainless Steel (SS) | 410 Heat Treated (HT) Cast Stainless Steel (SS) | |||||||||||||||
| Package Gland, Studs, and Nuts Material | |||||||||||||||||||
| 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | 316 Cast Stainless Steel (SS) | |||||||||||||||
| Certifications | |||||||||||||||||||
| German Institute for Standardization (DIN) | German Institute for Standardization (DIN) | German Institute for Standardization (DIN) | German Institute for Standardization (DIN) | German Institute for Standardization (DIN) | |||||||||||||||
| Inlet Gas Temperature | |||||||||||||||||||
|
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
|||||||||||||||
| Relative Humidity | |||||||||||||||||||
| 50% | 50% | 50% | 50% | 50% | |||||||||||||||
| Absolute Barometric Pressure | |||||||||||||||||||
|
760mmHg 29.92inHg |
760mmHg 29.92inHg |
760mmHg 29.92inHg |
760mmHg 29.92inHg |
760mmHg 29.92inHg |
|||||||||||||||
| Sealing Liquid Temperature | |||||||||||||||||||
|
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
15.6ºC 60ºF |
|||||||||||||||
| Inlet Size A' | |||||||||||||||||||
| 24in | 24in | 24in | 24in | 24in | |||||||||||||||
| Inlet Size B | |||||||||||||||||||
|
20-1/4in 514mm |
20-1/4in 514mm |
20-1/4in 514mm |
20-1/4in 514mm |
20-1/4in 514mm |
|||||||||||||||
| Inlet Flange Size C | |||||||||||||||||||
|
10 x 16in 250 x 395mm |
10 x 16in 250 x 395mm |
10 x 16in 250 x 395mm |
10 x 16in 250 x 395mm |
10 x 16in 250 x 395mm |
|||||||||||||||
| Inlet Flange Size D | |||||||||||||||||||
| 8 x 13-1/2in | 8 x 13-1/2in | 8 x 13-1/2in | 8 x 13-1/2in | 8 x 13-1/2in | |||||||||||||||
| Discharge Size E | |||||||||||||||||||
|
9in 229mm |
9in 229mm |
9in 229mm |
9in 229mm |
9in 229mm |
|||||||||||||||
| Discharge Size F | |||||||||||||||||||
|
9in 229mm |
9in 229mm |
9in 229mm |
9in 229mm |
9in 229mm |
|||||||||||||||
| Discharge Size G | |||||||||||||||||||
| 41-1/2in | 41-1/2in | 41-1/2in | 41-1/2in | 41-1/2in | |||||||||||||||
| Discharge Flange Size H | |||||||||||||||||||
| 6 x 11in | 6 x 11in | 6 x 11in | 6 x 11in | 6 x 11in | |||||||||||||||
| Discharge Flange Size I | |||||||||||||||||||
|
8 x 13-1/2in 200 x 340mm |
8 x 13-1/2in 200 x 340mm |
8 x 13-1/2in 200 x 340mm |
8 x 13-1/2in 200 x 340mm |
8 x 13-1/2in 200 x 340mm |
|||||||||||||||
| Note for Dimension | |||||||||||||||||||
|
|
|
|
|
|||||||||||||||
