Unit of Measure
Specifications
Brands |
N/A Vooner FloGard® Vooner VaneGard® |
Type |
N/A Single stage rotor, cone shape ports, liquid ring vacuum pump |
Cone Opening Vacuum Level |
N/A Low (L) |
Nominal Sealing Liquid Flow Rate at 15 Inch (in) Mercury Gauge (HgV) Vacuum |
N/A 75 to 115 L/min20 to 30 g/min |
Sealing Liquid Connection Size |
N/A 1 in |
Sealing Liquid Connection Type |
N/A National Pipe Thread (NPT) |
Shaft Sealing |
N/A Packing |
Bearing Design |
N/A Timken tapered roller bearing, grease lubricated. Type: Timken Assembly 90020, 67388 Cone, 67322D Cup, X1S-67388 Spacer |
Shaft Diameter (Drive End) |
N/A 4 in101.6 mm |
Pump Inlet Flange Connection Size |
N/A 8 in200 mm |
Pump Outlet Flange Connection Size |
N/A 6 in150 mm |
Manifold Inlet Flange Connection Size |
N/A 10 in250 mm |
Manifold Outlet Flange Connection Size |
N/A 8 in200 mm |
Approximate Pump Weight |
N/A 5,755 lb2,610 kg |
Certifications |
N/A German Institute for Standardization (DIN) |
Material Construction Features
Rotor Material |
N/A 316 Cast Stainless Steel (SS) |
Cone Material |
N/A 316 Cast Stainless Steel (SS) |
Head Material |
N/A 316 Cast Stainless Steel (SS) |
Note for Head Material |
N/A Replaceable 316 SS Wear Plates on cast iron heads. |
Bearing Carrier Material |
N/A Carbon Steel |
Housing Material |
N/A 316L Cast Stainless Steel (SS) |
Note for Housing Material |
N/A Stainless Steel liner in cast iron housing |
Shaft Material |
N/A 410 Heat Treated (HT) Cast Stainless Steel (SS) |
Package Gland, Studs, and Nuts Material |
N/A 316 Cast Stainless Steel (SS) |
Test Data Conditions
Inlet Gas Temperature |
N/A 15.6 ºC60 ºF |
Relative Humidity |
N/A 50 % |
Absolute Barometric Pressure |
N/A 760 mmHg29.92 inHg |
Sealing Liquid Temperature |
N/A 15.6 ºC60 ºF |
Dimension
Inlet Size A' |
N/A 24 in |
Inlet Size B |
N/A 20-1/4 in514 mm |
Inlet Flange Size C |
N/A 10 x 16 in250 x 395 mm |
Inlet Flange Size D |
N/A 8 x 13-1/2 in |
Discharge Size E |
N/A 9 in229 mm |
Discharge Size F |
N/A 9 in229 mm |
Discharge Size G |
N/A 41-1/2 in |
Discharge Flange Size H |
N/A 6 x 11 in |
Discharge Flange Size I |
N/A 8 x 13-1/2 in200 x 340 mm |
Note for Dimension |
N/A
|
