V4T130XVE6-M

Brands N/A Vooner FloGard®
Type N/A Single stage rotor, cone shape ports, liquid ring vacuum pump
Nominal Sealing Liquid Flow Rate at 20 to 24 Inch (in) Mercury Gauge (HgV) Vacuum N/A 110 to 120 g/min420 to 450 L/min
Sealing Liquid Connection Size N/A 2 in
Sealing Liquid Connection Type N/A National Pipe Thread (NPT)
Shaft Sealing N/A Packing
Shaft Diameter (Drive End) N/A 7.5 in
Pump Inlet Flange Connection Size N/A 14 in
Number of Pump Inlet Flange Connections N/A 2
Pump Outlet Flange Connection Size N/A 12 in
Number of Pump Outlet Flange Connections N/A 2
Approximate Pump Weight N/A 24,140 lb11,000 kg
Certifications N/A German Institute for Standardization (DIN)
Rotor Material N/A 316 Cast Stainless Steel (SS)
Cone Material N/A 316 Cast Stainless Steel (SS)
Head Material N/A 316 Cast Stainless Steel (SS)
Note for Head Material N/A Replaceable 316 Cast Stainless Steel (SS) Wear Plates on cast iron heads.
Bearing Carrier Material N/A Carbon Steel
Housing Material N/A 316L Cast Stainless Steel (SS)
Note for Housing Material N/A Stainless Steel liner in cast iron housing
Shaft Material N/A 410 Heat Treated (HT) Cast Stainless Steel (SS)
Package Gland, Studs, and Nuts Material N/A 316 Cast Stainless Steel (SS)
Inlet Size A N/A 39-11/16 in1008 mm
Inlet Size B N/A 39-5/8 in981 mm
Inlet Flange Size C N/A 20 x 27-1/2 in500 x 670 mm
Inlet Flange Size D N/A 14 x 21 in
Discharge Size E N/A 16-1/8 in410 mm
Discharge Size F N/A 10 in254 mm
Discharge Size G N/A 79-1/4 in
Discharge Flange Size H N/A 12 x 19 in
Discharge Flange Size I N/A 16 x 23-1/2 in400 x 565 mm
Note for Dimension N/A
  1. Bolt Holes Straddle Center Line
  2. All Flanges Flat Faced with ANSI Bolt Pattern
  3. Process Connection Flanges Flat Faced with DIN Bolt Pattern
  4. Manifolds are Constructed of CS, 304SS or 316SS
Inlet Gas Temperature N/A 60 ºF
Relative Humidity N/A 50 %
Absolute Barometric Pressure N/A 29.92 inHg
Sealing Liquid Temperature N/A 60 ºF