V4P75XVE4-M
| Brands | N/A Vooner FloGard® |
| Type | N/A Single stage rotor, cone shape ports, liquid ring vacuum pump |
| Nominal Sealing Liquid Flow Rate at 20 to 24 Inch (in) Mercury Gauge (HgV) Vacuum | N/A 245 to 285 L/min65 to 75 g/min |
| Sealing Liquid Connection Size | N/A 1-1/2 in |
| Sealing Liquid Connection Type | N/A National Pipe Thread (NPT) |
| Shaft Sealing | N/A Packing |
| Shaft Diameter (Drive End) | N/A 7 in177.8 mm |
| Pump Inlet Flange Connection Size | N/A 12 in300 mm |
| Number of Pump Inlet Flange Connections | N/A 2 |
| Pump Outlet Flange Connection Size | N/A 10 in250 mm |
| Number of Pump Outlet Flange Connections | N/A 2 |
| Approximate Pump Weight | N/A 13,350 lb6,050 kg |
| Rotor Material | N/A 304 Cast Stainless Steel (SS) |
| Cone Material | N/A 304 Cast Stainless Steel (SS) |
| Head Material | N/A 316 Cast Stainless Steel (SS) |
| Note for Head Material | N/A Replaceable 316 Cast Stainless Steel (SS) Wear Plates on cast iron heads. |
| Bearing Carrier Material | N/A Carbon Steel |
| Housing Material | N/A 304L Cast Stainless Steel (SS) |
| Note for Housing Material | N/A Stainless Steel liner in cast iron housing |
| Shaft Material | N/A 410 Heat Treated (HT) Cast Stainless Steel (SS) |
| Package Gland, Studs, and Nuts Material | N/A 316 Cast Stainless Steel (SS) |
| Inlet Gas Temperature | N/A 15.6 ºC60 ºF |
| Relative Humidity | N/A 50 % |
| Absolute Barometric Pressure | N/A 760 mmHg29.92 inHg |
| Sealing Liquid Temperature | N/A 15.6 ºC60 ºF |
| Inlet Size A | N/A 33-1/8 in841 mm |
| Inlet Size B | N/A 32-5/8 in829 mm |
| Inlet Flange Size C | N/A 16 x 23-1/2 in400 x 565 mm |
| Inlet Flange Size D | N/A 12 x 19 in |
| Discharge Size E | N/A 14-1/8 in359 mm |
| Discharge Size F | N/A 9 in229 mm |
| Discharge Size G | N/A 65-1/8 in |
| Discharge Flange Size H | N/A 10 x16 in |
| Discharge Flange Size I | N/A 14 x 21 in350 x 505 mm |
| Note for Dimension |
N/A
|
