Brands |
N/A Vooner FloGard® |
Series |
N/A VaneGard (VG) |
Bolt in Replace |
N/A CL |
Cone Opening Vacuum Level |
N/A High (H) |
Vacuum Pressure |
N/A 24 to 26 inHg |
Model |
N/A XVE4 |
Rotor Material |
N/A 304 Cast Stainless Steel (SS) |
Cone Material |
N/A 304 Cast Stainless Steel (SS) |
Head Material |
N/A 316 Cast Stainless Steel (SS) |
Note for Head Material |
N/A Replaceable 316 Cast Stainless Steel (SS) Wear Plates on cast iron heads. |
Bearing Carrier Material |
N/A Carbon Steel |
Housing Material |
N/A 304L Cast Stainless Steel (SS) |
Note for Housing Material |
N/A Stainless Steel liner in cast iron housing |
Shaft |
N/A 410 Heat Treated (HT) Cast Stainless Steel (SS) |
Package Gland, Studs, and Nuts Material |
N/A 316 Cast Stainless Steel (SS) |
Additional Information |
N/A Pump performance is defined by specifications as actual volume of dry air (ACFM flow rate) at the vacuum level (in. Hg vacuum) when operated at a given speed (RPM) consuming a certain amount of brake horsepower (BHP), at standard conditions of temperature and pressure. The pump performance curves provide a graphic representation of the specifications for a particular pump model. Individual pumps with rotor diameters greater than 15 in. (VG10 and larger) are guaranteed to perform according to these curves with a tolerance of 95% ACFM and 105% BHP at the standard conditions of 50% relative humidity, 60 ºF inlet air temperature, 60 ºF sealing liquid temperature, and 29.92" Hg absolute barometric pressure. Individual pumps with rotor diameters equal to or less than 15 in. (VG7 or smaller) are guaranteed to perform according to these curves with a tolerance of 90% ACFM and 110% BHP at 50% relative humidity, 60 ºF inlet air temperature, 60 ºF sealing liquid temperature, 29.92" Hg absolute barometric pressure. Performance is confirmed by individual testing and recorded by pump serial number. |