Unit of Measure
Specifications
Brands |
N/A Vooner FloGard® |
Type |
N/A Single stage rotor, cone shape ports, liquid ring vacuum pump |
Nominal Sealing Liquid Flow Rate at 24 to 28 Inch (in) Mercury Gauge (HgV) Vacuum |
N/A 450 to 570 L/min |
Sealing Liquid Connection Size |
N/A 2 in |
Sealing Liquid Connection Type |
N/A National Pipe Thread (NPT) |
Shaft Sealing |
N/A Packing |
Shaft Diameter (Drive End) |
N/A 190.5 mm |
Pump Inlet Flange Connection Size |
N/A 350 mm |
Number of Pump Inlet Flange Connections |
N/A 2 |
Pump Outlet Flange Connection Size |
N/A 300 mm |
Number of Pump Outlet Flange Connections |
N/A 2 |
Approximate Pump Weight |
N/A 10,100 kg |
Material Construction Features
Rotor Material |
N/A 316 Cast Stainless Steel (SS) |
Cone Material |
N/A 316 Cast Stainless Steel (SS) |
Head Material |
N/A 316 Cast Stainless Steel (SS) |
Note for Head Material |
N/A Replaceable 316 Cast Stainless Steel (SS) Wear Plates on cast iron heads. |
Bearing Carrier Material |
N/A Carbon Steel |
Housing Material |
N/A 316L Cast Stainless Steel (SS) |
Note for Housing Material |
N/A Stainless Steel liner in cast iron housing |
Shaft Material |
N/A 410 Heat Treated (HT) Cast Stainless Steel (SS) |
Package Gland, Studs, and Nuts Material |
N/A 316 Cast Stainless Steel (SS) |
Test Data Conditions
Inlet Gas Temperature |
N/A 15.6 ºC60 ºF |
Relative Humidity |
N/A 50 % |
Absolute Barometric Pressure |
N/A 760 mmHg29.92 inHg |
Sealing Liquid Temperature |
N/A 15.6 ºC60 ºF |
Certifications |
N/A German Institute for Standardization (DIN) |
Dimension
Inlet Size A |
N/A 39-11/16 in1008 mm |
Inlet Size B |
N/A 36-1/8 in918 mm |
Inlet Flange Size C |
N/A 20 x 27-1/2 in500 x 670 mm |
Inlet Flange Size D |
N/A 14 x 21 in |
Discharge Size E |
N/A 16-1/8 in410 mm |
Discharge Size F |
N/A 10 in254 mm |
Discharge Size G |
N/A 72-1/4 in |
Discharge Flange Size H |
N/A 12 x 19 in |
Discharge Flange Size I |
N/A 16 x 23-1/2 in400 x 565 mm |
Note for Dimension |
N/A
|
